Tuesday, February 05, 2008

 

S100 Innereien


dmesg



<4>Linux version 2.4.31 (root@box) (gcc version 2.95.4 20011002 (Debian prerelease)) #6 SMP Fri Oct 21 15:15:54 EDT 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000007ed0000 (usable)
<4> BIOS-e820: 0000000007ed0000 - 0000000007edf000 (ACPI data)
<4> BIOS-e820: 0000000007edf000 - 0000000007f00000 (ACPI NVS)
<5>0MB HIGHMEM available.
<5>126MB LOWMEM available.
<4>On node 0 totalpages: 32464
<4>zone(0): 4096 pages.
<4>zone(1): 28368 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 ACPIAM ) @ 0x000f5610
<6>ACPI: RSDT (v001 A M I OEMRSDT 0x06000514 MSFT 0x00000097) @ 0x07ed0000
<6>ACPI: FADT (v002 A M I OEMFACP 0x06000514 MSFT 0x00000097) @ 0x07ed0200
<6>ACPI: OEMB (v001 A M I AMI_OEM 0x06000514 MSFT 0x00000097) @ 0x07edf040
<6>ACPI: DSDT (v001 0AHMM 0AHMM107 0x00000107 INTL 0x02002026) @ 0x00000000
<4>Kernel command line: ramdisk_size=100000 lang=us vga=794 frugal ssh lang=de
<4>Found and enabled local APIC!
<6>Initializing CPU#0
<4>Detected 730.907 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 1458.17 BogoMIPS
<6>Memory: 124532k/129856k available (1386k kernel code, 4936k reserved, 567k data, 144k init, 0k highmem)
<6>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>ACPI: IRQ9 SCI: Level Trigger.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel Mobile Intel(R) Celeron(TM) CPU 733MHz stepping 04
<4>per-CPU timeslice cutoff: 731.53 usecs.
<5>SMP motherboard not detected.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 730.9394 MHz.
<4>..... host bus clock speed is 132.8979 MHz.
<4>cpu: 0, clocks: 1328979, slice: 664489
<4>CPU0
<4>Waiting on wait_init_idle (map = 0x0)
<4>All processors have done init_idle
<6>ACPI: Subsystem revision 20040326
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
<4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<6>PCI: Using ACPI for IRQ routing
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>VFS: Disk quotas vdquot_6.5.1
<4>pty: 256 Unix98 ptys configured
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH4: IDE controller at PCI slot 00:1f.1
<4>PCI: Enabling device 00:1f.1 (0005 -> 0007)
<6>ICH4: chipset revision 2
<6>ICH4: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
<6> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
<4>ide: late registration of driver.
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>Initializing Cryptographic API
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 836k freed
<4>EXT2-fs warning: checktime reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<7>PCI: Setting latency timer of device 00:1d.7 to 64
<6>ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
<6>ehci_hcd 00:1d.7: irq 9, pci mem c8831400
<6>usb.c: new USB bus registered, assigned bus number 1
<6>ehci_hcd 00:1d.7: enabled 64bit PCI DMA
<7>PCI: cache line size of 32 is not supported by device 00:1d.7
<6>ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
<6>hub.c: USB hub found
<6>hub.c: 6 ports detected
<6>usb-uhci.c: $Revision: 1.275 $ time 14:05:13 Aug 18 2005
<6>usb-uhci.c: High bandwidth mode enabled
<7>PCI: Setting latency timer of device 00:1d.0 to 64
<6>usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 2
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<7>PCI: Setting latency timer of device 00:1d.1 to 64
<6>usb-uhci.c: USB UHCI at I/O 0xe080, IRQ 7
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 3
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<7>PCI: Setting latency timer of device 00:1d.2 to 64
<6>usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 5
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 4
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<6>Initializing USB Mass Storage driver...
<6>usb.c: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>hub.c: new USB device 00:1d.7-1, assigned address 2
<6>scsi1 : SCSI emulation for USB Mass Storage devices
<4> Vendor: Kingston Model: DataTraveler2.0 Rev: 1.00
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
<4>SCSI device sda: 1956735 512-byte hdwr sectors (1002 MB)
<4>sda: Write Protect is off
<6>Partition check:
<6> sda: sda1 sda2
<7>WARNING: USB Mass Storage data integrity not assured
<7>USB Mass Storage device found at 2
<6>hub.c: new USB device 00:1d.0-2, assigned address 2
<4>usb.c: USB device 2 (vend/prod 0x46d/0xc313) is not claimed by any active driver.
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find ext2 filesystem on dev sd(8,1).
<4>Unable to identify CD-ROM format.
<4>cloop: Initializing cloop v2.01
<6>cloop: loaded (max 128 devices)
<4>cloop: /cdrom/KNOPPIX/KNOPPIX: 1833 blocks, 65536 bytes/block, largest block is 65552 bytes.
<7>ISO 9660 Extensions: RRIP_1991A
<6>Freeing unused kernel memory: 144k freed
<6>Real Time Clock Driver v1.10f
<6>ACPI: Power Button (FF) [PWRF]
<6>ACPI: Processor [CPU1] (supports C1, 8 throttling states)
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [cardbus] [pm]
<6>Intel ISA PCIC probe: not found.
<6>Databook TCIC-2 PCMCIA probe: not found.
<4>usbdevfs: remount parameter error
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb2:2.0
<6>input: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb2:2.1
<6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
<6>hid-core.c: USB HID support drivers
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<3>hw_random: RNG not detected
<6>Loaded prism54 driver, version 1.2
<6>8139too Fast Ethernet driver 0.9.26
<6>eth1: RealTek RTL8139 at 0xc8914c00, 00:02:ff:00:fa:e7, IRQ 10
<7>eth1: Identified 8139 chip type 'RTL-8100B/8139D'
<6>Intel 810 + AC97 Audio, version 1.01, 11:54:44 Aug 29 2005
<7>PCI: Setting latency timer of device 00:1f.5 to 64
<6>i810: Intel ICH4 found at IO 0xec00 and 0xe800, MEM 0xffa7fc00 and 0xffa7f800, IRQ 10
<6>i810: Intel ICH4 mmio at 0xc8924c00 and 0xc8926800
<6>i810_audio: Primary codec has ID 0
<6>i810_audio: Audio Controller supports 6 channels.
<6>i810_audio: Defaulting to base 2 channel mode.
<6>i810_audio: Resetting connection 0
<6>i810_audio: Connection 0 with codec id 0
<6>ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
<4>i810_audio: AC'97 codec 0, new EID value = 0x05c7
<4>i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
<7>eth0: resetting device...
<7>eth0: uploading firmware...
<4>Registering unionfs 1.0.14
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<6>mice: PS/2 mouse device common for all mice
<3>prism54: request_firmware() failed for 'isl3890'
<3>eth0: could not upload firmware ('isl3890')
<3>eth0: islpci_reset: failure
<6>eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
<6>eth1: link up, 100Mbps, full-duplex, lpa 0x45E1


/proc/cpuinfo



processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Mobile Intel(R) Celeron(TM) CPU 733MHz
stepping : 4
cpu MHz : 730.907
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1458.17



lspci




00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
Subsystem: Unknown device 7065:8086
Flags: bus master, fast devsel, latency 0
Memory at (32-bit, prefetchable)
Capabilities:

00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Capabilities:

00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
Flags: bus master, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at ff980000 (32-bit, non-prefetchable) [size=512K]
Capabilities:

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 24c0
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at e000 [size=32]
Kernel modules: usb-uhci, uhci

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 24c0
Flags: bus master, medium devsel, latency 0, IRQ 7
I/O ports at e080 [size=32]
Kernel modules: usb-uhci, uhci

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 24c0
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at e400 [size=32]
Kernel modules: usb-uhci, uhci

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 24c0
Flags: bus master, medium devsel, latency 0, IRQ 9
Memory at ffa7f400 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff700000-ff7fffff
Kernel modules: i810_rng, hw_random

00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 24c0
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at
I/O ports at
I/O ports at
I/O ports at
I/O ports at ffa0 [size=16]
Memory at 10000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 24c0
Flags: medium devsel, IRQ 10
I/O ports at e480 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
Subsystem: Intel Corporation Unknown device 24c0
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at e800 [size=256]
I/O ports at ec00 [size=64]
Memory at ffa7fc00 (32-bit, non-prefetchable) [size=512]
Memory at ffa7f800 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel modules: i810_audio

01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at d800 [size=256]
Memory at ff7fdc00 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel modules: 8139too

01:07.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
Subsystem: Z-Com, Inc. XG-600 and clones Wireless Adapter
Flags: bus master, medium devsel, latency 64, IRQ 7
Memory at ff7fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities:
Kernel modules: prism54

Comments: Post a Comment
Links to this post:

Create a Link


<< Home

This page is powered by Blogger. Isn't yours?